Essential Duties and Responsibilities 1.
Perform inspections such as fit-up, welding, dimensional, material, magnetic particle testing, dye penetrant testing, hardness testing, etc.
2.
Execute welding inspection to monitor and verify the welding parameters as per WPS are followed.
3.
Conduct visual inspection before, during and after welding for good workmanship standards.
4.
Confirm In-process, Final, Welding Inspections and Heat treatments are carried out according to the Manufacturing Route Sheet.
5.
Witness and monitor pressure tests, PWHT and interpret relevant charts.
6.
Understand and interpret relevant Oil States procedures, work instruction, quality plans, ITP, relevant to job scope including API 6A, API 16A, API 16C, API 16F, etc. requirements.
7.
Prepare requests and coordinate with vendors for radiographic tests, load test etc.
8.
Interpret radiographic films and advise Production of any repair as required for known defect.
9.
Verify to ensure the measuring instruments/welding machines are duly calibrated and maintained.
10.
Advise welders the proper care and handling of welding consumables.
11.
Report welds defect details with reference to weld joint number to welding and QC Engineers.
12.
Guide welders and operators to understand the route sheet requirement(s), as required.
13.
Ensure relevant documents such as route sheets, WPS, drawings etc., are made available to the welders and/or operators during work.
14.
Ensure every preceding operation in the route sheet(s) is properly stamped.
15.
Prepare inspection Reports and submit through Master Control for QC Engineer approval, if necessary to obtain Third Party Approval, reports shall be printed and submitted to QC Engineer for review prior to the Master Control Upload.
16.
Monitor the welding procedure qualifications (PQR) to support development of WPS which includes calculating the heat input and conducting of welder's qualifications.
17.
To perform any coating inspection activities (Surface preparation, atmospheric condition, WFT and DFT checks, Visual inspection, adhesion, and additional testing requirement)
18.
Performs qualifications of coating processes
19.
Prepare coating report
20.
Ensure that coating process is meeting the project requirements/ITP/ Procedure.
21.
Create a work instruction for coating activities.
22.
Comply with Oil States Quality Management System, Oil States HSE Policy and requirements.
Qualification Requirements: Formal Education & Certification Diploma, Degree in Engineering/Science, or equivalent qualification
Certified welding inspector from CWI or CSWIP 3.1 is preferred.
Certified coating inspector Level 2 as per NACE, BGAS, SSPC or FROSIO
NDT Level II in MPI, DPI, UT & RT as per SNT-TC-1A or PCN, is preferred.
Knowledge & Experience 5 years of experience as QC for Welding and Coating inspection with knowledge in fabrication and manufacturing.
Computer literate with knowledge of Microsoft applications (Excel, Word)
Familiar with welding process such as SMAW, FCAW, GMAW, GTAW, SAW and etc.
Familiar with welding of AISI 4130, AISI 8630, F22 and X80 material preferred
Personal Attributes Good communication and interpersonal skills.
Meticulous and able to work together as part of a team, a good team player.
